Water sprayer, sprinkler pump is mainly used for landscaping sprinkler, fire sprinkler sanitation, such as cars, can be used for road surface cleaning effect such as dust, followed by the sprinkler irrigation water gun can be used for the road greening.

This series adopts the centrifugal self-priming pumps, pump shall have the right amount of liquid. Pump starts, rotating impeller, the impeller inlet negative pressure formation, mix the gas and liquid in the pump suction pipe, through the pressure out of the room into the gas-liquid separation chamber. Because the proportion of gas and liquid is poor, rise separated from the liquid, gas from the eduction in outlet pipe, liquid sinks in the gas-liquid separation chamber, the cycle for many times, until the gas suction pipe net and filled with liquid, complete the self-priming process, of the normal operation of pump to start work, therefore, in order to ensure the pump has a good self-priming performance, must meet the following conditions:

1, before work, pump in the liquid stock must be higher than the pump shaft, so the pump inlet must pick up a bend bend to pick a horizontal tube and quick connectors, quick connectors center line must be higher than the pump shaft centerline 300 mm.

2, import pipeline system must ensure that no leakage, sealed performance is good.

3, suction suction head must be immersed in water, in order to prevent air suction pipe.

4, the export pipeline and pump outlet connection must ensure that the straight pipe length 200 mm or more after bending.

Five must have a filter tee, water inlet pipe in the end, to ensure water before entering the water pump does not have impurities damage precision components within the pump.

Detailing sprinkler pumps have a variety of specifications are:

Model: 80 QZB (F) 60/90 flow (m3 / h) : 60 m after, head (m) : 90, the output speed: 1480, shaft power (kw) : 22.5, self-priming height (m) : 6.5, self-priming time (min / 5 m) : 1.0 efficiency: 65%, note: left and right rotation

Model: 65 QZB - 50/110 n flow (m3 / h) : 50 m after, head (m) : 110, the output speed: 1480, shaft power (kw) : 24, self-priming height (m) : 6.5, self-priming time (min / 5 m) : 1.0 efficiency: 60%, note: left rotation

Model: 65 QZB (F) 40/45 flow (m3 / h) : 40 m after, head (m) : 45, the output speed: 1450, shaft power (kw) : 9.25, self-priming height (m) : 4.5, self-priming time (min / 5 m) : 1.5, efficiency: 65%, note: left and right rotation

Model: 65 QZB (F) 50/50 flow (m3 / h) : 50 m after, head (m) : 50