GC is multi-stage segmental type, boiler feed pump G 1-1/2 GC - 4 GC four types of import and export on the water and water respectively, are vertical, the head can be used according to need and increase or decrease the pump series.

GC boiler feed pump is particularly suited to the boiler feed water, also can be widely used in pressure vessel water supply, hot water circulation, high-rise building water supply, irrigation, fire pressurization, rinse with water, food, brewing, medicine, chemical industry, aquaculture, environmental protection, such as the chemical technological process and form a complete set of machine tool industry, as the power equipment of water supply and drainage.

GC boiler feed water pump of the main parts of shaft, shaft sleeve, water inlet, impeller, guide vane, sealing ring, middle, ring section, water balance, the balance disc, the end cap. Water, middle, water section and end cap are made from cast iron, together form the studio of pump.

GC boiler feed pump is multi-stage segmental type, 1-1/2 GC - 4 GC four types of import and export on the water and water respectively, are vertical, the head can be used according to need and increase or decrease the pump series. The pump assembly is good or not, a great influence on performance, especially the export of the impeller and guide vane to import the relative position of each suction impeller vomit export hub must be aimed at the center of the guide vane, which thought the flow of the pump to be used to reduce a bit, head down, poor efficiency, help in the inspection after assembly is important to note that if there is deviation must be adjusted.

GC main parts of shaft, shaft sleeve, boiler feed pump inlet, impeller, guide vane, sealing ring, middle, ring section, water balance, the balance disc, the end cap.

Water, middle, water section and end cap are made from cast iron, together form the studio of pump.

Impeller is made from cast iron, with blade, along the axial liquid into the unilateral, due to the pressure before and after impeller, there must be axial force, the axial force by balance disc, the impeller was manufactured by the static balance test.