How to make oil discharge in slurry pump

1, if you want to put all the oil from slurry pump body, can unscrew a drain plug at the bottom of the box body, the drainage of oil.

2, slurry pump out under the condition of discharge of oil, liquid level distance tank roof height not more than 30 mm, in order to make sure each bearing lubrication and cooling in the pump, when jack working chamber volume is too large, need to pay another tank, ensure that the discharge of oil liquid level after the minimum height not less than 100 mm in order to avoid empty absorption.

3, a velocity slurry pump first run after 500 h, should be in oil tank cleaning and oil filter, with visual and assay method of testing oil, when oil deterioration should be timely oil change, oil change must be cleaning tank and oil filter at the same time, if you have any scrap metal oil or water, side by side should look for reasons out of order.

4, the liquid level lower bearing in a short time by oil and plunger spring attached to lubricating oil splashing, about oil tank and pump the oil filter is 230 mesh/inch copper wire mesh, oil screen should often clean to prevent clogging, when using the oil tank temperature should not exceed 60 ℃, when it is necessary to take appropriate measures to cool.

Information consulting industry manager cui ji pump source pump industry